REX12D-T
Electronic circuit breaker, REX12D-T, DC 24 V, rail mounting, fixed and variable current ratings, no. of channels 1/2, IO link, Modbus-RTU
The electronic circuit protector REX12 consists of the supply module EM12-T and the single-channel or double-channel electronic circuit protector REX12-T for side-by-side mounting.
The only 12.5 mm wide modules feature push-in technology and allow no-tool time-saving wiring.
Depending on the requirement, up to 16 circuit protectors can be placed on the symmetrical rail and are electrically connected by means of a flap-hinged mechanism - no further accessories required. The circuit protector REX12-T offers selective overcurrent protection by responding to short circuit or overload faster than the switched mode power supply.
Capacitive loads of up to 20,000µF can be switched on without problems. The circuit protectors are available in all standard current ratings from 1 A to 10 A. Ease of adjustment to cable cross section is ensured by the internal fail-safe element (blade fuse) which is directly adjusted to the current rating of the circuit protector.
Voltage rating |
DC 24 V (18...30 V) |
---|---|
Voltage rating |
|
Rated voltage |
1 A / 1 A 2 A / 2 A 3 A / 3 A 4 A / 4 A 6 A / 6 A 8 A 10 A 1 A-10 A ajustable |
Number of channels | 1 and 2 |
Load disconnection |
with short circuit/overload: < 10 ms overload: typically 3 s |
Status indication | 1 LED green/orange/red: status/fault |
Temperature range | |
Terminal design | PT-terminals |
Mounting method | DIN rail |
Certificates | UL2367 DC 24 V UL1310 NEC Class2 DC 24 V UL508 (listed) DC 24 V |
Número de pedido | Descripción | |
---|---|---|
EM12-T00-000-DC24V-40A |
supply module, standard, without auxiliary contact |
|
EM12-T00-000-GND-40A |
standard, supply module GND – 0V |
|
EM12-T00-200-LINE-40A |
supply module, mid, LINE disconnected |
|
EM12-T00-100-LINE-40A |
supply module, mid/right, LINE connected |
|
EM12-T01-001-DC24V-40A |
standard, auxiliary contact (make contact) |
|
PM12-T01-00-LOAD-20A |
potential module, 10 terminals 2.5mm², 1 x line entry, 9 x LOAD |
|
PM12-T03-00-GND-20A |
potential module, 10 terminals 2.5mm² |
|
PM12-T02-00-LOAD-20A |
potential module, 10 terminals 2.5mm², 2 x line entry separate, 4 x LOAD each |
Datasheet & Explanations