ESX10
Electronic circuit protector DC 24 V, max. 16 A, electr. disconnection 1 LED, reset input, status output
It provides selective protection for all DC 24 V load circuits at a width of only 12.5 mm. This is achieved by a combination of active electronic current limitation in the event of a short circuit and overload disconnection at typically 1.25 times rated current. Plugged into an E-T-A socket, which is available with screw terminals or screwless terminals, the REF16-S provides ease of installation. The sockets allow power distribution and signalling via plug-in type jumpers. In addition the REF16-S latches on when plugged into the socket and by means of coding pins a clear assignment to current ratings or slots is possible. Dimensions are in compliance with the standard DIN 43880 for the installation of built-in units.
Voltage rating |
DC 24 V (18...30 V) |
---|---|
Voltage rating |
|
Rated voltage |
0.5 A 1 A 2 A 3 A 4 A 6 A 8 A 10 A |
Number of poles | 1-pole |
Current limitation | typically 1.25 x IN |
Signal output | contacto de señal sin potencial máx. DC 30 V / 0,5 A, mín. 10 V / 10 mA (contacto de apertura o cierre), salida de señal de conmutación (+ 24 V)) |
Status indication | 1 LED green/orange/red: status/fault |
Temperature range | |
Terminal design | blade terminals 6.3 mm |
Mounting method | en la toma 80/81plus |
Certificates | CE-logo |
Número de pedido | Descripción | |
---|---|---|
80PLUS-PT01 |
Base 80plus |
|
81PLUS-UT01 |
Base 81plus |
|
Y31062401 |
Puente, rojo, 2 polos |
|
Y31062501 |
Puente, rojo, 4 polos |
|
Y30882311 |
Puente, rojo, 10 polos |
|
Y31062402 |
Puente, azul, 2 polos |
|
Y31062502 |
Puente, azul, 4 polos |
|
Y30882312 |
Puente, azul, 10 polos |
|
Y31062403 |
Puente, gris, 2 polos |
|
Y30882313 |
Puente, gris, 10 polos |
|
Y31062601 |
coding star, red, 4 coding pins |
|
X22297750 |
Etiqueta |